MAKSTTON Vehicle Fitment Guide

XIAOMI YU7 GT Wheel Fitment Guide

By Binghua Yang · September 2026

Based on a XIAOMI YU7 GT measured by MAKSTTON, this complete wheel fitment guide covers the 5×114.3 bolt pattern, center bore, factory 21-inch staggered wheel sizes and offsets (21×9.5J ET36 front / 21×10.5J ET36 rear), 265/40R21 front and 295/35R21 rear tire sizes, M14×1.5 lug nuts, measured fender clearance, and recommended wheel sizes and offsets for aftermarket forged wheels.

View Recommended Fitment
XIAOMI YU7 GT fitted with MAKSTTON FG BO05 forged wheels, front three-quarter installation view

XIAOMI YU7 GT Fitment at a Glance

Fitment Item MAKSTTON Reference
Bolt Pattern (PCD) 5×114.3
Published Center Bore 64.5mm
Measured Hub Pilot Diameter 64.47mm
MAKSTTON Recommended Custom Wheel Center Bore 64.55mm
Factory Wheel 21×9.5J ET36 (front) | 21×10.5J ET36 (rear)
Factory Tire 265/40R21 (front) | 295/35R21 (rear)
Factory Wheel Fasteners M14×1.5 lug nuts
Gross Vehicle Weight Rating 2,910kg
Minimum Recommended Wheel Load Rating ≥ 873kg per wheel

Factory Wheel and Tire Specifications

MAKSTTON measured the factory 21-inch staggered package on the inspected XIAOMI YU7 GT. The front and rear use different wheel widths and tire sizes, both with a 21-inch diameter.

Position Wheel Offset Tire
Front 21×9.5J ET36 265/40R21
Rear 21×10.5J ET36 295/35R21

Factory wheel and tire data measured by MAKSTTON on an inspected XIAOMI YU7 GT

Bolt Pattern and Center Bore

The published center-bore specification and the physical hub-pilot measurement describe different components. The first refers to the wheel center bore; the second refers to the vehicle's hub-centering pilot.

Specification MAKSTTON Reference
Bolt Pattern (PCD) 5×114.3
Published Center Bore 64.5mm
Measured Hub Pilot Diameter 64.47mm
MAKSTTON Recommended Custom Wheel Center Bore 64.55mm

PCD and center-bore data measured by MAKSTTON on an inspected XIAOMI YU7 GT

XIAOMI YU7 GT Wheel Bolt and Lug Nut Specifications

Fastener Item Specification
Fastener Type Lug nuts
Thread Size M14×1.5
Nut Length 25mm
Seat Type 60° conical seat
Strength Grade 10
Hex Size 21mm

Recommended Wheel Load Rating

The XIAOMI YU7 GT has a gross vehicle weight rating of 2,910kg, and the factory wheel does not carry a marked load rating. MAKSTTON therefore derives the target from the vehicle's maximum permitted mass using a safety factor of 1.2:

2,910kg ÷ 4 × 1.2 = 873kg

MAKSTTON recommended minimum: ≥ 873kg per wheel.

Load capacity should never be traded for a lower wheel weight or a more aggressive wheel position. Confirm the final value against the exact vehicle version before ordering.

Measured Factory Fender Clearance

Baseline: factory 21×9.5J ET36 front / 21×10.5J ET36 rear package at factory suspension height, measured from the fender lip to the outer wheel rim.

Measurement Front Left Front Right Rear Left Rear Right
Fender lip to wheel rim ≈14mm ≈11mm ≈15mm ≈17mm

Use this guide as a baseline, not the final answer. Measurements from your own vehicle are always more valuable. Read our Flush Fitment Guide, measure your car, and calculate the fitment that matches the stance you want.

Wide-Tire Fitment Reference

A 305-section rear tire is not recommended because inner clearance is insufficient. If 305 is used, the wheel and tire must sit further outward, so some protrusion beyond the fender line should be expected.

MAKSTTON Custom Fitment Recommendation

Based on the factory suspension height.

5mm Wheel-Rim Inset from the Fender

Position Wheel Size Offset Tire
Front 21×9.5J ET30 265/40R21
Rear 21×10.5J ET26 295/35R21

Fender clearance may vary slightly between vehicles due to production tolerances. Use these figures as a reference only.

Recommended MAKSTTON Wheel Designs

These six made-to-order forged wheel designs can be custom-manufactured for the XIAOMI YU7 GT. Wheel diameter, width, offset, bolt pattern, center bore, load rating and finish are specified for the vehicle and order.

Real-World Fitment 01: XIAOMI YU7 GT

XIAOMI YU7 GT fitted with MAKSTTON FG BO06 wheels, installation view
View More Fitment Photos & Installation Details
Item Front Rear
Wheel Model MAKSTTON FG BO06
Wheel 21×9.5J ET25 21×10.5J ET25
Tire 265/40R21 295/35R21

Real-World Fitment 02: XIAOMI YU7 GT

XIAOMI YU7 GT fitted with MAKSTTON FG BO05 wheels, installation view
View More Fitment Photos & Installation Details
Item Front Rear
Wheel Model MAKSTTON FG BO05
Wheel 21×9.5J ET25 21×10.5J ET25
Tire 265/40R21 295/35R21

MAKSTTON Vehicle Measurement Record

This original MAKSTTON workshop data-collection sheet is included for reference. For mainstream vehicles, MAKSTTON may review and summarize measurements from multiple vehicle records rather than rely on a single sheet.

Original MAKSTTON XIAOMI YU7 GT wheel, hub, fastener and chassis measurement data sheet

Original vehicle measurement record completed by MAKSTTON

XIAOMI YU7 GT Wheel Fitment FAQ

What is the XIAOMI YU7 GT bolt pattern and center bore?

The XIAOMI YU7 GT uses a 5×114.3 bolt pattern with a 64.5mm published center bore, while MAKSTTON machines its custom wheels to 64.55mm for this application.

What wheel and tire sizes does the XIAOMI YU7 GT use from the factory?

The measured XIAOMI YU7 GT runs a staggered 21-inch package: 21×9.5J ET36 with 265/40R21 at the front and 21×10.5J ET36 with 295/35R21 at the rear.

What lug nuts does the XIAOMI YU7 GT use?

The XIAOMI YU7 GT is secured with M14×1.5 lug nuts with a 25mm nut length, a 60° conical seat, strength grade 10 and a 21mm hex. Confirm the seat type and thread engagement against the new wheel before installation.

What is the measured fender clearance on the XIAOMI YU7 GT?

On the inspected vehicle with the factory 21-inch wheels, MAKSTTON recorded ≈14mm and ≈11mm at the front and ≈15mm and ≈17mm at the rear, measured from the fender lip to the outer wheel rim.

What wheel load rating does the XIAOMI YU7 GT need?

The factory wheel does not carry a marked load rating, so MAKSTTON derives the target from the 2,910kg gross vehicle weight rating with a safety factor of 1.2: ≥ 873kg per wheel.

What wheel fitment does MAKSTTON recommend for the XIAOMI YU7 GT?

See the final recommendation table for the current wheel-rim inset options, offsets and matching tire sizes.

Binghua Yang, Product Development Manager, MAKSTTON

Binghua Yang | Product Development Manager

Renbing Xiong, Technical Department, MAKSTTON

Technical data: Renbing Xiong | Technical Department

If you have any questions, find an error in this guide or have additional verified fitment data, please contact MAKSTTON at info@makstton.com.