MAKSTTON Vehicle Fitment Guide

XIAOMI YU7 Wheel Fitment Guide

By Binghua Yang · September 2026

Based on a XIAOMI YU7 Max measured by MAKSTTON, this guide covers YU7 wheel fitment in full: the 5×114.3 bolt pattern, the 64.5mm center bore, the factory staggered 21-inch wheels and offsets (21×8J ET36 front / 21×9.5J ET42 rear), the 245/45R21 and 275/40R21 tire sizes, the M14×1.5 lug nuts, the measured fender clearance and the recommended fitment for aftermarket forged wheels.

The vehicle measured for this guide is the YU7 Max, but the bolt pattern, center bore, hub pilot diameter, wheel-bolt specification and fender clearance are common across the YU7 range, so the wheel and tire sizes in this guide apply to the other versions as well.

View Recommended Fitment
XIAOMI YU7 Max fitted with MAKSTTON FG FK07R forged wheels, rear three-quarter installation view

XIAOMI YU7 Fitment at a Glance

Fitment Item MAKSTTON Reference
Bolt Pattern (PCD) 5×114.3
Published Center Bore 64.5mm
Measured Wheel Center Bore 66.62mm
Measured Hub Pilot Diameter 64.5mm
MAKSTTON Recommended Custom Wheel Center Bore 64.55mm
Factory Wheel 21×8J ET36 (front) | 21×9.5J ET42 (rear)
Factory Tire 245/45R21 (front) | 275/40R21 (rear)
Factory Wheel Fasteners M14×1.5 lug nuts
Gross Vehicle Weight Rating 2,855kg
Factory Wheel Load Rating 810kg per wheel (front and rear)

Factory Wheel and Tire Specifications

MAKSTTON measured the factory 21-inch staggered package on the inspected XIAOMI YU7. The front and rear use different wheel widths, offsets and tire sizes.

Position Wheel Offset Tire Wheel Weight Wheel Load Rating
Front 21×8J ET36 245/45R21 16.1kg 810kg
Rear 21×9.5J ET42 275/40R21 17.76kg 810kg

Factory wheel, tire, weight and load-rating data measured by MAKSTTON on an inspected XIAOMI YU7

Bolt Pattern and Center Bore

Three different figures matter here. The published center bore is the specification normally quoted for the vehicle; the measured wheel center bore is what MAKSTTON recorded on the factory wheel itself; and the measured hub pilot diameter is the physical centering boss on the vehicle's hub. MAKSTTON machines its custom wheels to a fixed value that provides correct hub-centric location on the measured vehicle.

Specification MAKSTTON Reference
Bolt Pattern (PCD) 5×114.3
Published Center Bore 64.5mm
Measured Wheel Center Bore 66.62mm
Measured Hub Pilot Diameter 64.5mm
MAKSTTON Recommended Custom Wheel Center Bore 64.55mm

PCD and center-bore data measured by MAKSTTON on an inspected XIAOMI YU7

XIAOMI YU7 Wheel Bolt and Lug Nut Specifications

Fastener Item Specification
Fastener Type Lug nuts
Thread Size M14×1.5
Nut Length 25mm
Seat Type 60° conical seat
Strength Grade 10
Hex Size 21mm

Measured Factory Fender Clearance

Baseline: factory 21×8J ET36 front / 21×9.5J ET42 rear package at factory suspension height, measured from the fender lip to the outer wheel rim.

Measurement Front Left Front Right Rear Left Rear Right
Fender lip to wheel rim ≈20mm ≈22mm ≈16mm ≈17mm

Use this guide as a baseline, not the final answer. Measurements from your own vehicle are always more valuable. Read our Flush Fitment Guide, measure your car, and calculate the fitment that matches the stance you want.

MAKSTTON Custom Fitment Recommendation

Based on the factory suspension height.

10mm Wheel-Rim Inset from the Fender

19-inch

Position Wheel Size Offset Tire
Front 19×8.5J ET32 245/55R19
Rear 19×8.5J ET23 245/55R19

20-inch

Position Wheel Size Offset Tire
Front 20×8.5J ET32 245/50R20
Rear 20×9J ET30 275/45R20

21-inch

Position Wheel Size Offset Tire
Front 21×8.5J ET32 245/45R21
Rear 21×9.5J ET36 275/40R21

5mm Wheel-Rim Inset from the Fender

19-inch

Position Wheel Size Offset Tire
Front 19×8.5J ET27 245/55R19
Rear 19×8.5J ET18 245/55R19

20-inch

Position Wheel Size Offset Tire
Front 20×8.5J ET27 245/50R20
Rear 20×9J ET25 275/45R20

21-inch

Position Wheel Size Offset Tire
Front 21×8.5J ET27 245/45R21
Rear 21×9.5J ET31 275/40R21

Fender clearance may vary slightly between vehicles due to production tolerances. Use these figures as a reference only.

Recommended MAKSTTON Wheel Designs

These eight made-to-order forged wheel designs can be custom-manufactured for the XIAOMI YU7. Wheel diameter, width, offset, bolt pattern, center bore, load rating and finish are specified for the vehicle and order. The recommended wheel and tire specifications are listed in the fitment-at-a-glance table above.

In-Stock MAKSTTON Wheel Options

The FG FK07RL forged wheel is stocked in the following 5×114.3 fitments, so a YU7 set can ship without waiting for a custom build. Confirm the offset and center bore against the exact vehicle before ordering.

Wheel Size Bolt Pattern Offset Center Bore
FG FK07RL 19×8.5J 5×114.3 ET35 73.1mm
FG FK07RL 20×8.5J 5×114.3 ET30 73.1mm
20×9J 5×114.3 ET32 73.1mm
FG FK07RL 21×8.5J 5×114.3 ET27 64.55mm
21×9.5J 5×114.3 ET35 64.55mm

The 21-inch in-stock fitments are machined to a 64.55mm center bore and mount hub-centric on the YU7 without additional hardware. The 19- and 20-inch in-stock fitments carry a 73.1mm center bore, so they require hub-centric ring (spigot ring) adapters to locate correctly on the YU7 hub — MAKSTTON supplies the correct rings with the set.

Finishes stocked: Gloss Bronze, Gloss Silver, Gloss White, Piano Black and Matte Gunmetal. See the FG FK07RL product page for current availability.

Real-World Fitment 01: XIAOMI YU7

XIAOMI YU7 fitted with MAKSTTON FG FK07RS wheels, 22-inch installation view
View More Fitment Photos & Installation Details
Item Front Rear
Wheel Model MAKSTTON FG FK07RS
Wheel 22×9.5J ET35 22×10.5J ET35
Tire 275/35R22 295/35R22
Brake Caliper FEIZI ST8

Real-World Fitment 02: XIAOMI YU7

XIAOMI YU7 fitted with MAKSTTON FG2P FK08 wheels, 21-inch installation view
View More Fitment Photos & Installation Details
Item Front Rear
Wheel Model MAKSTTON FG2P FK08
Wheel 21×9.5J ET30 21×10.5J ET37
Tire 265/40R21 295/35R21

Real-World Fitment 03: XIAOMI YU7

XIAOMI YU7 fitted with MAKSTTON FG FK07RS wheels, 20-inch installation view
View More Fitment Photos & Installation Details
Item Front Rear
Wheel Model MAKSTTON FG FK07RS
Wheel 20×9.5J ET35 20×10.5J ET38
Tire 275/45R20 305/40R20
Brake Caliper MOTVE GS6

Real-World Fitment 04: XIAOMI YU7

XIAOMI YU7 fitted with MAKSTTON FG FK07R wheels, 21-inch installation view
View More Fitment Photos & Installation Details
Item Front Rear
Wheel Model MAKSTTON FG FK07R
Wheel 21×9.5J ET35 21×10.5J ET40
Tire 275/40R21 305/35R21
Brake Caliper MOTVE MX9

Real-World Fitment 05: XIAOMI YU7

XIAOMI YU7 fitted with MAKSTTON FG FK07R wheels, 19-inch installation view
View More Fitment Photos & Installation Details
Item Front Rear
Wheel Model MAKSTTON FG FK07R
Wheel 19×9.5J ET32.5 19×10.5J ET38
Tire 265/50R19 295/45R19

MAKSTTON Vehicle Measurement Record

This original MAKSTTON workshop data-collection sheet is included for reference. For mainstream vehicles, MAKSTTON may review and summarize measurements from multiple vehicle records rather than rely on a single sheet.

Original MAKSTTON XIAOMI YU7 wheel, hub, fastener and chassis measurement data sheet

Original vehicle measurement record completed by MAKSTTON

XIAOMI YU7 Wheel Fitment FAQ

What is the XIAOMI YU7 bolt pattern and center bore?

The XIAOMI YU7 uses a 5×114.3 bolt pattern with a 64.5mm center bore.

What wheel and tire sizes does the XIAOMI YU7 use from the factory?

See the final recommendation table for the current wheel-rim inset options, offsets and matching tire sizes.

What lug nuts does the XIAOMI YU7 use?

The XIAOMI YU7 is secured with M14×1.5 lug nuts with a 25mm nut length, a 60° conical seat, strength grade 10 and a 21mm hex. Confirm the seat type and thread engagement against the new wheel before installation.

What is the measured fender clearance on the XIAOMI YU7?

On the inspected vehicle with the factory 21-inch wheels, MAKSTTON recorded ≈20mm and ≈22mm at the front and ≈16mm and ≈17mm at the rear, measured from the fender lip to the outer wheel rim. See the measured fender clearance section.

What wheel load rating does the XIAOMI YU7 need?

The factory wheel carries a marked load rating of 810kg, the same at the front and the rear. A replacement wheel should match at least the value for the axle it is fitted to; the final target should be confirmed against the exact vehicle version.

What wheel fitment does MAKSTTON recommend for the XIAOMI YU7?

See the final recommendation table for the current wheel-rim inset options, offsets and matching tire sizes.

Binghua Yang, Product Development Manager, MAKSTTON

Binghua Yang | Product Development Manager

Renbing Xiong, Technical Department, MAKSTTON

Technical data: Renbing Xiong | Technical Department

If you have any questions, find an error in this guide or have additional verified fitment data, please contact MAKSTTON at info@makstton.com.