Your cart
Your cart is empty
Continue shopping
MST CK57
Sale price
$149.00 USD per wheel
Regular price
Regular price
$149.00 USD per wheel
Unit price
Increments of 1
Minimum of 1
Maximum of
MST CK57
Sale price
$149.00 USD per wheel
Regular price
Regular price
$149.00 USD per wheel
Unit price
Production & Delivery
Estimated dispatch within 2 weeks after final specification confirmation with our team.
Lead times begin from the milestones above, not the payment date. Transit time is additional; economy shipping typically takes 30 days or longer, depending on destination and customs clearance.
All timelines are estimates. We will notify you of any changes to your expected dispatch schedule.
Description
Makstton MST CK57 is a low-pressure cast street wheel developed as a wider-spoke evolution of the MST 717. Its broad spokes and exposed center give it a more substantial road-oriented profile than the earlier model.
Faceted surfaces divide each spoke into distinct planes while preserving a clean radial layout. Compared with the MST 717, the CK57 uses greater spoke width and more surface area around the open center while retaining the same road-focused design direction.
A new way to view wheels
VR functionality is only supported on iOS
Description
Makstton MST CK57 is a low-pressure cast street wheel developed as a wider-spoke evolution of the MST 717. Its broad spokes and exposed center give it a more substantial road-oriented profile than the earlier model.
Faceted surfaces divide each spoke into distinct planes while preserving a clean radial layout. Compared with the MST 717, the CK57 uses greater spoke width and more surface area around the open center while retaining the same road-focused design direction.
Wheel Install Guide
Installation & Safety
Professional installation is required. Before mounting the tires, inspect the wheels and confirm the size, offset, bolt pattern, center bore, brake clearance, and overall vehicle compatibility.
Always perform a bare-wheel test fit first. Ensure the wheel sits fully against the hub and does not contact the brakes, suspension, steering components, or bodywork.
Use the correct hub-centric rings and fasteners where required. Final tightening must be completed with a calibrated torque wrench according to the vehicle manufacturer’s specifications.
Recheck the wheel-bolt or lug-nut torque after 80–160 km (50–100 miles). Stop installation or use immediately if interference, vibration, damage, or any other abnormal condition is found.
Have a question?
Wheel Specifications
| Size | Color | ET | PCD | CB | Drill | Weight | Load | X Dist. | Tire Mounting | Socket |
|---|---|---|---|---|---|---|---|---|---|---|
| 17x7.5J | Piano Black / Machined Face | 35 | 5*100 | 73.1 | Ø15*Ø29*60° | 9.7kg~ | 690kg | 31.6mm | Front Mounting | 17/19HEX |
| 17x7.5J | Piano Black / Machined Face | 35 | 5*112 | 66.56 | Ø15*Ø29*60° | 9.7kg~ | 690kg | 31.6mm | Front Mounting | 17/19HEX |
| 17x7.5J | Piano Black / Machined Face | 35 | 5*114.3 | 73.1 | Ø15*Ø29*60° | 9.7kg~ | 690kg | 31.6mm | Front Mounting | 17/19HEX |
Notes:
Specifications shown are subject to actual factory inventory.
Listed weights are based on the maximum offset (ET) and largest center bore. Actual weight may vary depending on center bore and offset. Production tolerances apply.
Use 60° conical-seat wheel bolts or lug nuts for installation. All MTW Wheel Union wheels use 60° conical bolt seats.
| Size | Color | ET | PCD | CB | Drill | Weight | Load | X Dist. | Tire Mounting | Socket |
|---|---|---|---|---|---|---|---|---|---|---|
| 18x8.5J | Piano Black / Machined Face | 35 | 5*112 | 66.56 | Ø15*Ø29*60° | 10.65kg~ | 700kg | 41mm | Front Mounting | 17/19HEX |
| 18x8.5J | Piano Black / Machined Face | 45 | 5*112 | 66.56 | Ø15*Ø29*60° | 10.65kg~ | 700kg | 32.2mm | Front Mounting | 17/19HEX |
| 18x8.5J | Piano Black / Machined Face | 35 | 5*114.3 | 73.1 | Ø15*Ø29*60° | 10.65kg~ | 700kg | 41mm | Front Mounting | 17/19HEX |
| 18x8.5J | Piano Black / Machined Face | 45 | 5*114.3 | 73.1 | Ø15*Ø29*60° | 10.65kg~ | 700kg | 32.2mm | Front Mounting | 17/19HEX |
| 18x8.5J | Gloss Gunmetal / Machined Face | 35 | 5*114.3 | 73.1 | Ø15*Ø29*60° | 10.65kg~ | 700kg | 41mm | Front Mounting | 17/19HEX |
| 18x8.5J | Piano Black / Machined Face | 35 | BLANK | 73.1 | Ø15*Ø29*60° | 10.65kg~ | 700kg | 41mm | Front Mounting | 17/19HEX |
Notes:
Specifications shown are subject to actual factory inventory.
Listed weights are based on the maximum offset (ET) and largest center bore. Actual weight may vary depending on center bore and offset. Production tolerances apply.
Use 60° conical-seat wheel bolts or lug nuts for installation. All MTW Wheel Union wheels use 60° conical bolt seats.
| Size | Color | ET | PCD | CB | Drill | Weight | Load | X Dist. | Tire Mounting | Socket |
|---|---|---|---|---|---|---|---|---|---|---|
| 19x8.5J | Piano Black / Machined Face | 35 | 5*112 | 66.56 | Ø15*Ø29*60° | 11.7kg~ | 705kg | 40mm | Front Mounting | 17/19HEX |
| 19x8.5J | Piano Black / Machined Face | 35 | 5*114.3 | 73.1 | Ø15*Ø29*60° | 11.7kg~ | 705kg | 40mm | Front Mounting | 17/19HEX |
| 19x8.5J | Piano Black / Machined Face | 38 | BLANK | 73.1 | Ø15*Ø29*60° | 11.7kg~ | 705kg | 37mm | Front Mounting | 17/19HEX |
Notes:
Specifications shown are subject to actual factory inventory.
Listed weights are based on the maximum offset (ET) and largest center bore. Actual weight may vary depending on center bore and offset. Production tolerances apply.
Use 60° conical-seat wheel bolts or lug nuts for installation. All MTW Wheel Union wheels use 60° conical bolt seats.
